Materials
Check out our selection of quality materials for CNC machining, injection molding, sheet metal fabrication and 3D printing, for both prototyping and production stages.
CNC Machined Metals
- Aluminum
- Copper
- Bronze
- Brass
- Stainless steel
- Steel
- Titanium
- Zinc
- Magnesium
CNC Machined Plastics
- HDPE
- Acetal (Delrin)
- Polypropylene
- UHMW-PE
- Nylon 6/6
- Acrylic
- ABS
- Polycarbonate
- PEEK
- PTFE-Teflon
- Garolite
- PVC
- ULTEM
Sheet Metal Materials
- Aluminum
- Brass
- Bronze
- Copper
- Stainless Steel
- Steel
- Titanium
3D Printed Metals
DMLS / DMLM Metal 3D Printing
- Aluminum AlSi10Mg
- Stainless Steel 17-4
- Stainless Steel 316/L
- Maraging Steel MS1
- Inconel 625
- Inconel 718
- Titanium Ti64
Binder Jet Metal 3D Printing
- X1 Metal 420i (Stainless Steel Infiltrated with Bronze)
- X1 Metal 316i (Stainless Steel Infiltrated with Bronze)
- 316L (single alloy)
- Single Alloy 17-4PH Stainless Steel
- Single Alloy 304L Stainless Steel, 97% dense
- Single Alloy M2 Tool Steel
- Single Alloy Inconel 718, 99.2% dense
- Tungsten-Bronze metal composite, 97% dense
3D Printing Plastics
- Nylon (HP MJF, SLS, FDM)
- Resin (DLS)
- Resin (SLA)
- Resin (PolyJet)
- ABS (FDM)
- ASA (FDM)
- ULTEM (FDM)
- PPSF (FDM)
- Polycarbonate (FDM)
- Polypropylene (HP MJF)
- TPU (HP MJF)
Injection Molding Plastics and Elastomers
Injection Molding Plastics and Elastomers
- ABS (acrylonitrile butadiene styrene)
- ASA (acrylonitrile styrene acrylate)
- CA (cellulose acetate)
- HDPE (high-density polyethylene)
- LCP (liquid crystal polymer)
- LDPE (low-density polyethylene)
- PA 6 (polyamide 6, nylon 6)
- PA 6/6 (polyamide 6/6, nylon 6/6)
- PARA (polyarylamide)
- PBT (polybutylene terephthalate, Valox)
- PEI (polyetherimide, Ultem)
- PE-PP (polyethylene-polypropylene)
- PE-PS (polyethylene-polystyrene)
- PES (polyethersulfone)
- PBT-PET (polybutylene terephthalate-polyethylene terephthalate)
- PC (polycarbonate)
- PC-ABS (polycarbonate-acrylonitrile butadiene styrene)
- PC-PBT (polycarbonate-polybutylene terephthalate, Xenoy)
- PC-PET (polycarbonate-polyethylene terephthalate)
- PCT (polycyclohexylenedimethylene terephthalate)
- PE (polyethylene
- PEEK (polyether ether ketone)
- TPU (thermoplastic polyurethane (Shore D))
- PET (polyethylene terephthalate, Rynite)
- PLA (polylactic acid)
- PMMA (polymethyl methacrylate, acrylic)
- POM (acetal polyoxymethylene, Delrin)
- PP (polypropylene)
- PPA (polyphthalamide)
- PPS (polyphenylene sulfide, Ryton)
- PS (polystyrene)
- PS-PPE (polystyrene-polyphenyl ethers, Noryl)
- PSU (polysulfone, Udel)
- PVC (polyvinyl chloride (Shore D)
- PVDF (polyvinylidene fluoride, Kynar)
- SAN (styrene acrylonitrile)
- TPO (thermoplastic polyolefin)
Elastomer/Rubber molded materials
- EPDM (ethylene propylene diene monomer rubber (Viton))
- PEBA (polyether block amide)
- PVC (polyvinyl chloride (Shore A))
- TPE (thermoplastic elastomer)
- TPU (thermoplastic polyurethane (Shore A))
- TPV (thermoplastics elastomer, vulcanized rubber (Santoprene))
- LSR (liquid silicone rubber)
Urethane Casting Materials
Rigid Polyurethane (Black, Natural, Color-Match)
- ABS-like, FR
- General Purpose Shore 78D
- Glass-Filled Nylon-like Shore 85D
- Polypropylene-like Shore D65-D75
- Polycarbonate-like Shore 84D
Rigid Clear Polyurethane (Colorless)
- Rigid Clear Shore D 80
Rubber-like Polyurethane (Black, Natural, Color-Match)
- Rubber-like Shore A 25-35
- Rubber-like Shore A 35-45
- Rubber-lIke Shore A 45-55
- Rubber-like Shore A 55-65
- Rubber-like Shore A 65-75
- Rubber-like Shore A 75-85
- Rubber-like Shore A 85-95
Clear Rubber-like Polyurethane (Colorless)
- Clear Rubber-like Shore A 40-50
- Clear Rubber-like Shore A 60-70
- Clear Rubber-like Shore A 65-75
- Clear Rubber-like Shore A 85-95
